Sabrent Rocket Q4 2TB


Sabrent is a USA based consumer electronics and accessories manufacturer founded in 1998. The company is committed is to offer the latest technology and the highest quality consumer electronic products at an affordable cost to all users. The product range offered by Sabrent includes M.2 type memory and storage items, USB hubs, chargers, cables, camera accessories among other types of products.

Official product link:


Packaging and accessories

The Sabrent Rocket Q4 2TB is packaged in a metal made box with a cardboard outer layer. The packaging of this SSD contains two separate boxes, one that contains the SSD and the other that contains the heatsink and its accessories. The front side of the packaging has a profile photo of the SSD and its included heatsink. The manufacturer’s name and logo are placed on the upper side while the capacity of the SSD is printed on the lower right corner.


The back side of the box has a photo that presents the components of the heatsink. This includes everything from the metal plate at the top to the copper heatpipes underneath or the contact plate on the lower part.


The SSD has excellent protection against impacts and punctures as its box is in fact a metal case. This case as a lovely rose color and a simple label on the left side, which describes the SSD inside. The interior of this casing has a foam tray that holds the SSD in place.



The product comes with the following accessories:
– 1x User Manual
– 1x Heatsink
– 1x Phillips screw driver
– 1x Thermal pads



Series: Rocket
Capacity: 2TB
Form Factor: M.2 Type 2280
Interface: PCIe Gen 4 x4, NVMe 1.3
Controller: Sabrent PH-SBT-RKT-401 (Phison PS5012-E16)
Flash Chips: Micron 96-layer 3D QLC (MT29F1T08GBLBE3W / IA7HG66AWA)
DRAM: 2x 1GB SKHynix DDR4-2666 (H5AN8G8NCJR-VKC)
Sequential Read: 4800 MB/s
Sequential Write: 3600 MB/s
Max. 4k random file read: 350,000 IOPS
Max. 4k random file write: 700,000 IOPS
Cache: pSLC
Endurance (TBW): 1665 TBW
Operating Temperature: 0°C to 70°C
Operating Voltage: 3.5W (Max)
Dimensions: 22mm x 80mm
Warranty: 5 years


– NVMe M.2 PCIe Gen4 x4 Interface.
– Built to the PCIe 4.0 specification / NVMe 1.3 Compliant.
– Power Management Support for APST / ASPM / L1.2.
– Supports SMART and TRIM commands.
– Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface.
– Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision.
– Upgradeable Firmware.

Leave a Reply

Your email address will not be published. Required fields are marked *