Noctua NH-P1


Introduction

Noctua is a company specialized in designing and producing of high-end coolers and fans for PC type systems. The company was founded in 2005 by Rascom Computerdistribution and Taiwanese company Kolink International. Today Noctua is present in more than 30 countries, being one of the most known manufacturers of cooling solutions.

Official product link:

https://noctua.at/en/nh-p1

 

Packaging and accessories

The NH-P1 is delivered in a square cardboard made box, which has the classic Noctua packaging design. The front side has an abstract photo of the cooler and its heatpipes, with the complete product name printed on the on the upper part and the features of the cooler listed in the middle.

 

The sides of the box have the complete technical specifications of the cooler. In addition, the opposite side of the packaging has a short description of the CPU cooler printed in nine languages.

 

The back side of the box lists the main characteristics of the cooler. Each is presented with the help of a small monochrome diagram and a short description.

 

The cooler and the included accessories are packaged in a simple cardboard box. The packaging features a monochrome diagram on the top side, which lists all the included accessories.

 

Accessories

The product comes with the following accessories:
– 1x User manual
– 1x Noctua Metal Case-Badge
– 1x NT-H2 high-grade thermal compound
– 2x Metal Fan Clips
– 1x Torx Screw Driver
– 1x NM-IBP2 backplate
– 2x NM-IMB2 mounting bars
– 4x NM-IPS1 plastic spacers
– 4x NM-ITS1-TX thumb screws
– 4x NM-IBT2 bolts
– 4x NM-ITS1-TX thumb screws
– 2x NM-AMB8 mounting bars
– 4x NM-APS4 plastic spacers for AM4
– 4x NM-APS5 plastic spacers for AM2(+)/AM3(+) FM1/FM2(+)
– 4x NM-ALS1-TX long screws

 

Specifications

Model: Noctua NH-P1
Supported sockets:
Intel: LGA20xx (LGA2066, LGA2011-0 & LGA2011-3 Square ILM), LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156)
AMD: AM2, AM2+, AM3, AM3+, AM4 (included since 2019, older coolers require NM-AM4), FM1, FM2, FM2+
Heatsink:
Materials: Copper (base and heat-pipes), aluminum (cooling fins), soldered joints & nickel plating
Dimensions (without fan): (H)158mm x (W)154mm x (D)152mm
Heatpipes: 6x – Ø6 mm
Weight: 1180g (without the fan installed)
Fan(s):
Fan compatibility: 120x120x25
Warranty: 6 Years

Features:

– Designed for passive cooling from the ground up
– Fanless cooling for high-end CPUs
– Increased performance headroom with extra fan
– No noise, less dust, 100% fail-proof
– Asymmetrical layout for optimal PCIe compatibility
– 100% RAM clearance on LGA1200 and AM4
– SecuFirm2+™ Torx-based multi-socket mounting system
– Compatibility with past and future sockets
– NT-H2 next-gen thermal compound
– Soldered interface between heatpipes and fins
– 6-year manufacturer’s warranty

Leave a Reply

Your email address will not be published. Required fields are marked *