Silverstone Hydrogon D120 ARGB



Founded in 2003, SilverStone is an established leader in the IT field distinguishing itself through exceptional quality of their products and through their elegant and innovative design. Since 2003, SilverStone expanded its line of products offering customers a wide selection of products, from power supplies, fans and cooling solutions to cases and mounting systems for monitors and TV’s. All with a stylish look characteristic of SilverStone.


Official product link:


Packaging and accessories

The Hydrogon D120 ARGB is packaged in a square cardboard box. The front side of the packaging has a profile photo of the cooler and the two ARGB fans. The name of the cooler is placed on the lower center side, while the manufacturer’s name and emblem are found on the top. The RGB systems that are compatible with the Hydrogon D120 ARGB cooler, are presented on the lower part.


The sides of the box present the main characteristics of the cooler. This is done using photos of the cooler and a brief description of each. The opposite side has a QR code which links to an online version of the user manual.


The back side of the packaging has the complete technical specifications of the cooler and the included 120mm fans. In addition, on the right side there are three diagrams of the cooler, and its general measurements.


The cooler is protected by high quality soft foam pads, placed on the top and bottom sides.



The product comes with the following accessories:
– 1x User manual
– 1x Silverstone thermal compound
– 1x Phillips Screw Driver
– 1x Backplate
– 2x Intel mounting arms
– 2x AMD mounting arms
– 4x Metal Studs
– 4x Intel 2066 screws
– 4x AMD screws
– 4x Metal nuts
– 4x Plastic spacers (black)
– 4x Plastic spacers (white)
– 4x Plastic clips



Supported sockets:
Intel: LGA 2066/2011/1200/115x/1366/775.
Materials: Copper (base and heat-pipes), aluminum (cooling fins), soldered joints & nickel plating
Dimensions (with fan): (H)153mm x (W)125mm x (D)112mm
Heatpipes: 6x – Ø6 mm
Weight: 885g (with Fans installed)
Model: HYD120-ARGB CC12025H12S
Dimensions: 120x120x25 mm
Bearing type: Hydraulic bearing
Max. Rotational Speed (+/- 10%): 1850 RPM
Max. airflow: 56.23 CFM
Max. acoustical noise: 30.5 dB(A)
Connector: 4-Pin PWM
Voltage Range: 12 V
MTBF: > 35,000 h
Warranty: 1 or 2 years depending on region


– Dual tower CPU cooler with dual fans and 6 copper heat-pipes ensuring the best thermal conducting efficiency
– Fin offset design eliminates interference between memory modules and CPU cooler on LGA1200 motherboards
– 9 bladed high performance 120mm PWM controlled fans, with fan speed range of 0~1850 RPM**
– Anti-vibration rubber pads included for additional noise dampening

Leave a Reply

Your email address will not be published. Required fields are marked *