Introduction
Iceberg Thermal is a company that has been involved in the industrial sector before launching into the consumer market. The company has started selling six different CPU coolers and a few fan models on the consumer market. However, in the industrial sector, Iceberg Thermal is selling CPU coolers, graphics card coolers and custom cooling solutions.
Official product link:
https://www.iceberg-thermal.com/product/cpu-cooler/icesleet-x6/
Packaging and accessories
The IceSLEET X6 is packaged in a simple square cardboard box. There are little to no graphics present on the packaging, except for a label that is applied on two sides of the box. This label has a single-color diagram of the CPU cooler alongside the product name and the manufacturer’s emblem.
The back side of the box has all the technical specifications of the CPU cooler and the used fan.
The cooler and the included accessories are protected by hard cardboard boxes. The cooler has a thin plastic cover which offers a good protection against scratches.
Accessories
The product comes with the following accessories:
– 1x User manual
– 1x FUZEIce™ Plus (0.8 g) thermal compound
– 1x backplate
– 4x Mounting nuts
– 2x Intel mounting bars
– 2x AMD mounting bars
– 4x Plastic spacers
– 4x Double thread screws AMD
– 4x Double thread screws Intel
Specifications
Model: IceSLEET X6
Supported sockets:
Intel: LGA 1200, 2066, 115X, 2011-0, 2011-3 (Square ILM), 1366, 775.
AMD: AM4, AM3(+), AM2(+), FM2(+), FM1.
Heatsink:
Materials: Copper (base and heat-pipes), aluminum (cooling fins)
Dimensions (with fan): (H)159mm x (W)146mm x (D)115mm
Heatpipes: 6x – Ø6 mm
Weight: 882g
Fan(s):
Model: IceSLEET X6
Dimensions: Proprietary 120mm
Bearing type: Fluid Dynamic Bearing
Min. Rotational Speed (+/- 10%): 500 RPM
Max. Rotational Speed (+/- 10%): 1850 RPM
Max. airflow: 76 CFM
Max. acoustical noise: 36 dB(A)
Connector: 4-Pin PWM
Voltage Range: 12 V
MTBF: > 150.000 h
Warranty: 2 Years
Features:
– 6 Tuned Copper Heat Pipes
– Compatible with Intel/AMD
– Vivid ARGB Lighting
– Auto START and STOP Feature:
– The Fan is Silent, Until Duty Cycle Reaches 21% Loading
– Complete Bond Soldering Between Fin Sheets
– Copper Base Fully Covers the Chipset
– Nickel Plate Finishing
