Scythe Kaze Flex RGB PWM


Introduction

Scythe Co., Ltd, began its operation and business in November 2002 as a distributor and a manufacturer of passive and low-noise PC components. Since then, Scythe is recognized for their excellent & affordable products.

 

Official product link:

http://www.scythe-eu.com/en/products/fans/kaze-flex-120-rgb-pwm.html

Packaging and accessories

The Kaze Flex RGB PWM fan is packaged in a clear hard plastic shell, that offers little protection against impacts. The front side of the packaging is transparent, showing the fan and the Scythe emblem placed on the front of the fan hub. On the front side of the box, the main features of the fans are presented, alongside the variant of the fan found inside and its rotational speed.

 

The back side of the packaging presents the complete technical specifications of all Kaze Flex RGB fan models available. This is done in seven different languages, while the warranty terms and conditions are printed in only two languages, on the lower side of the packaging.

 

The sides of the packaging share the same multicolored design as the rest of the box. Here the model of the fan is printed with the RGB symbol placed on the right.

 

Accessories

The product comes with the following accessories:
– 4x Fan screws
– 1x Molex Adapter

 

Specifications

Model: Kaze Flex RGB PWM
Model number:
SU1225FD12LR-RDP
SU1225FD12MR-RHP
SU1225FD12HR-RNP
Size: 120 x 120 x 27 mm
Bearing: Sealed Precision Fluid Bearing
Number of blades: 11
Rated Voltage: 12 V
Max Input Power: 1,08 W
Max. Input Current: 0,05 A
Min. Rotational Speed: 300 RPM (for all models)
Rotational Speed (+/- 10%): 800/1200/1800 RPM
Static Pressure: 0.49/1.05/2.40 mm H₂O
Airflow: 43.03/ 51.17/ 79.76 CFM
Acoustical Noise: 14.5/ 24.9/ 35.8 dB(A)
Lifetime MTBF: > 120.000 hours
Connector: 4-Pin PWM
Weight: 140 g
Warranty: 2 years

Features:

– RGB illumination
– Sealed Precision FDB
– Integrated Anti-Vibration System
– Versatile Applications

Leave a Reply

Your email address will not be published. Required fields are marked *