Sabrent Rocket Q 2TB

 

Introduction

Sabrent is a USA based consumer electronics and accessories manufacturer founded in 1998. The company is committed is to offer the latest technology and the highest quality consumer electronic products at an affordable cost to all users. The product range offered by Sabrent includes M.2 type memory and storage items, USB hubs, chargers, cables, camera accessories among other types of products.

Official product link:

https://www.sabrent.com/product/SB-RKTQ-2TB/rocket-q-2tb-nvme-pcie-m-2-2280-internal-ssd-high-performance-solid-state-drive/

 

Packaging and accessories

The Sabrent Rocket Q 2TB is packaged in two boxes. The outer box is made out of cardboard and has a simple design, with a white background and subtle light blue accents. The front side features a photo of the SSD general information of the product.
However, the highlight of the packaging is inside, as the SSD and its accessories are placed inside a metal made box. This is great in terms of overall presentation and also offers a great deal of protection.

 

The back side of the packaging has a top-down photo of the SSD alongside additional technical information regarding the SSD.

 

The SSD has excellent protection as it is placed inside a hard foam shell and a metal made box. In addition, an extra foam pad is placed on top of the SSD to prevent any movement during shipping.

 

Specifications

Series: Rocket Q
Model: SB-RKTQ-2TB
Capacity: 2TB
Form Factor: M.2 Type 2280
Interface: PCIe Gen3 x 4
Controller: Phison PS5012-E12S-32
Flash Chips: Micron, 96-layer 3D QLC (IA7HG67AWA)
DRAM: 4GB DDR3L DRAM (SCB13H4G160)
Sequential Read: 3,200 MB/s
Sequential Write: 2,900 MB/s
Max. 4k random file read: 255,000 IOPS
Max. 4k random file write: 670,000 IOPS
Cache: SLC
Endurance (TBW): 530 TBW
Operating Temperature: 0°C to 70°C
Operating Voltage: 3.5W (Max)
Dimensions: 22mm x 80mm
Warranty: 5 years

Features:

– M.2 PCIe Gen3 x 4 Interface.
– PCIe 3.1 Compliant / NVMe 1.3 Compliant.
– Power Management Support for APST / ASPM / L1.2.
– Supports SMART and TRIM commands. Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface.
– Advanced Wear Leveling, Bad Block Management, and Over-Provision.

Leave a Reply

Your email address will not be published. Required fields are marked *