Visual inspection
The KF13.096 backpack is a camera backpack that can be expanded to contain more items. The design of this backpack is based around a dark green woodland camouflage pattern present on the outside material.
The KF13.096 backpack uses metal and plastic clasps and is water resistant. The backpack has a weight of 1.2kg, a height of 45cm with a width of 30cm.
The top part of the KF13.096 is covered by its main cover. Speaking of the cover, it is held firmly in place by a solid metal made spring loaded clasp. This type of system should be widely used on all backpacks, as it solid and offers more security for the backpack.
With the main cover opened, the interior of the KF13.096 backpack is easily accessible. Contrasting the subtle woodland camouflage of the exterior, the interior of this backpack is bright orange. From this top part, the dedicated notebook slot is accessible. With this backpack, you can carry notebooks with a screen size of up to 15 inch.
The backside of the KF13.096 backpack has three large mesh pads. These are soft and will allow the air to move around the backpack even when it’s being used. This type of mesh pads are great for keeping the user cool and will prevent moisture from appearing on the backpack. The same mesh padding is placed on the entire surface of the straps.
On the side of the backpack there are four small pockets, each pair covered by a soft Velcro secured cover. Each of these covers has a diagram on them, one with an SD card and the other one with a pair of Triple-A Batteries. These pockets can accommodate lens caps, lens filters and many smaller items, that Velcro cover is also nice, as it will limit the movement of anything you have in these pockets and prevent them from getting out and being dropped.
The front of the backpack features two large pockets on the lower part. These are using metal zippers to contain the items placed inside. These pockets are large enough to contain a wide variety of items, including camera lenses, although I wouldn’t recommend that.
