The interior
The interior used with the Endorfy Arx 500 ARGB is generous in its size and has a good design overall. For cable management, the case has large and thick rubber covers on the sides of the motherboard spot. Not only that but the cable tie down points are installed in the ideal locations to aid the cable management.
On the inside, this case can accommodate multiple form factor motherboards, such as: Mini ITX, Micro-ATX, & ATX.
The bottom of the case has a large power supply cover that is not removable. However, this shroud does have its features. The top part has two 2.5” SSD mounting points and a single fan mounting point that will accept only a single 120mm fan.
In addition, the power supply shroud has plenty of space for radiator support at the front and rubber grommets for wire management.
In terms of the wire management space, there is a lot of it at the back of the motherboard. Not only that, but this case has plenty of tie-down points for even small wires on the edges of the motherboard tray.
Behind the motherboard tray the case offers two 2.5” SSD mounting points. These are using rubber grommets to attach the SSD to the motherboard tray. It’s a simple system that has been widely used before.
While this case has a lot of tie-down points for cable management, it also has dedicated and reusable Velcro straps. These are installed on the main cables of the case, but can be relocated with ease.
A great feature to have is the integrated fan controller, and in the case of the Endorfy Arx 500 ARGB, this controller is also an RGB controller.
It is installed on the upper part at the front of the case and has most of its wires pre-routed. This controller can handle up to 5 fans at the same time and that’s for both the fan control and the RGB control.
