IN WIN was founded in 1985. Headquartered in Taoyuan, Taiwan, is a manufacturer of cases, power supplies and IT accessories. IN WIN became a leader with high quality products and services. The eight elements that are the foundation of IN WINs success are: Innovation, Service, Speed, Value, Safety, Warmth, Faithfulness, and Diligence.
Official product link:
Packaging and accessories
The case is packaged in a standard black and white cardboard box with the following dimensions (H x W x D) 506 x 282 x 532mm.
The front and back sides of the packaging are identical and feature the pinstripe design that is present on most cases from the 100 series. The model number is printed on the center of the box with the case format presented below.
The sides of the box are simple, here the full product specifications are printed alongside the main features of the case.
The internal packaging of the case is the classic hard foam that has been used before, it offers decent protection against impacts. However, the In Win 103 features a tempered glass side panel, so an additional soft foam pad should have been included to protect that glass side panel.
The product comes with the following accessories:
– 1x Manual
– 1x Pin Header
– 1x Graphics Card Holder
– 1x RGB Controller
– 1x Motherboard Stand-off Socket
– 7x Motherboard Stand-offs
– 8x Water-cooling System Washers
– 10x Cable Ties
– 12x 2.5” HDD Screws
– 18x Hexagon Head Screws
Model: IW-103-Black / IW-103-White
Colors available: Black, White
Materials: SECC, ABS, PC, Tempered Glass
Motherboard Support: ATX, Micro-ATX, Mini-ITX
Weight: 7.31 kg
Dimensions H x W x D: 425 x 210 x 473 mm
Expansion Slots: 7x
– 2x – 2.5″ drive bays
– 2x – 3.5″ HDD positions (can also accommodate 2.5″ units);
– 2x USB 3.0
– 1x Headphone
– 1x Microphone
Pre-Installed Fans: None
– Bottom: 3x – 120mm;
– Rear: 1x 120mm;
– Side: 2x 120mm;
– Dust filters: Bottom.
Water cooling compatibility:
– Bottom – 360, 240, 120 mm radiator;
– Rear – 120 mm radiator;
– Side – 240, 120mm radiator.
– CPU coolers up to 160mm in height;
– Graphics cards up to 421 mm in length and 305mm with side radiator installed.
– Power supply compatibility up to 200mm in length
– Extra graphics cards support holder
– Quick removal dust filter
– Two 2.5” SSD mounts in the back of motherboard tray
– Supports 3.5”/2.5” HDD trays
– Addressable RGB
– Tempered glass side panel